Setting
Setting RFID interfaces with the RFID PC Demo software for Modbus TCP
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 198
Example: Using automatic mode for command repetition
In automatic mode, commands are repeated by the Modbus master or a connected DXP. In the
following example, 16 bytes of a tag are read cyclically in automatic mode by a read/write
device connected to channel 0 of the interface.
Click Channel 0 Ò Read/Write Ò Automatic Ò Read.
Fig.113: Automatic mode — read
To Next Page
Loading...