Operation
Use CODESYS function blocks
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 234
Example: Incorporating the function block
In order to run the function block, the package file for RFID interfaces must be installed.
Call the Package Manager in CODESYS: Click Tools Ò Package Manager.
Fig.140: Opening the Package Manager
Select the package file for RFID interfaces and install.
Fig.141: Installing a Package file
After the installation has been successfully completed, the Package file is displayed as follows
in the Package Manager:
Fig.142: Display of the Package file in the Package Manager
To Next Page
Loading...