Operation
Reading error codes
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
07.00 | 2022/09 | 252
Error code (hex.) Error code (dec.) Meaning
0xB0BD 45245 Error when setting the transfer rate
0xB0DA 45274 Error with the “Tag in detection range” function
0xB0E0 45280 Error when reading the read/write head version
0xB0E1 45281 Error when reading the advanced read/write head version
0xB0F1 45297 Error with automatic read/write head tuning
0xB0F8 45304 Error when resetting a command in Continuous Mode
0xB0FA 45306 Error when outputting the response code
0xB0FF 45311 Error when resetting the read/write head
0xB0B3 45235 Error when setting the tag password
0xB0B6 45238 Error when setting the write or read protection
0xB0B8 45240 Error when reading the protection status of the memory area on the tag
0xB0C3 45251 Error when setting the password in the read/write head
0xD0… 53… UHF read/write head reports error
0xD001 53249 Error when resetting the UHF read/write head
0xD002 53250 Error when reading the read/write head version
0xD003 53251 Error when reading the read/write head version when a tag is in the detec-
tion range
0xD004 53252 Error when setting the read/write head address
0xD009 53257 Error with the parameter setting of the UHF read/write head
0xD00A 53258 Error setting the transfer speed and the operating mode of the UHF read/
write head
0xD00B 53259 Error when polling
0xD00D 53261 Error when reading the device status
0xD00E 53262 Error when resetting the internal status bit
0xD00F 53263 Error when setting the read/write head outputs and/or LEDs
0xD011 53265 Error when reading the internal malfunctions
0xD014 53268 Diagnostics error
0xD016 53270 Error with the heartbeat message
0xD017 53271 Error when outputting the user settings
0xD01B 53275 Error when emptying the message memory in Polling mode
0xD081 53377 Error when switching turning on/off UHF-carrier
0xD083 53379 Error when reading from a tag
0xD084 53380 Error when writing to a tag
0xD085 53381 Software trigger error
0xD088 53384 Error when outputting a command according to EPC Class1 Gen2
0xD100 53504 Error with the Backup function
0xD101 53505 Error with the Backup function (required memory not available)
0xD102 53506 Error when restoring a backup
0xD103 53507 Error when restoring a backup (no backup present)
0xD104 53508 Error when restoring a backup (backup data damaged)
0xD105 53509 Error when restoring the default settings
To Next Page
Loading...
Need help?
General
