Valtra 6550 - Page 783

730
Model Code Page
1. 11. 1998
6000--8750
6440
44. Quick---shift gear, reverse shuttle
and 4WD clutch
15. 5. 1993
44.4 4WD clutch/4WD output shaft
A
ETV 893 260
1
) Socket spanner for 4WD output shaft nut (Gearbox 505---905)
ETV 894 170
2
) Socket spanner for 4WD output s haft nut (new tool)
ETV 891 900
1
) Sleeve for fitting 4WD output shaft sealing ring/bearing (Gearbox 505---905)
B
ETV 890 830
1
) Sleeve for fitting 4WD clutch piston onto the o utput shaft (PTO 505---905)
1
) Tr a c t o rs wi t h ou t q u i ck --- sh i f t g e a r or w i th 2 --- st ep q u i c k --- s h i f t ge a r
2
) Tractors with 3---step quick---shift gear Delta Powershift. The nut is t he same as the nut at the front end of t he bevel pinon shaft
on 505---905 tractors. For this nut spanner ETV 893 440 is used. Spanner ETV 894 170 can be replaced by welding a sleeve onto
the tool ETV 893 440.
ETV 893 260
ETV 890 830
ETV 891900
ETV 894 170
44.5. HiTech Shuttle
ETV 894 350 Compressing tool for F---clutch large coil spring
ETV 894 350