Station Group Assign (PGM 190/191) 1-103
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
You can change the location of a group member using Up/Down key. Then PC Admin will
send the changed order of stations to the MPB and the MPB will save with the new order
of stations.
You use the [Attribute Assign] button to change the data that is already programmed.
Station Group Type (PGM 190)
ITEM RANGE DEFAULT REMARK
Group Type 0-7 0 0: Not assigned
1: Circular
2: Terminal
3: UCD
4: Ring
5: VM
6: Pick up
7. Net VM
Pick-up Attribute ON/OFF OFF OFF
Member Assignment Not
Assigned
-- Group Type must be assigned first.
To Next Page
Loading...
