CO Related Admin (PGM 140/141/142/143/146/147) 2-44
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
CO Service Type (PGM140)
ITEM REMARK
Normal CO All lines are assigned as normal CO lines by default.
Each CO line in the system can be programmed as a DISA (Direct
Inward System Access) line and the DISA types are as follows:
- Flex BTN 1 (Day) / 2 (Night) / 3 (Weekend) / 4 (On Demand)
- Each DISA type (BTN 1-3) has sub-attributes
F1: DISA Service On/Off.
F2: VMIB Message No.(Voice announcement(VMIB Message) can
be assigned (00-70) and it is not assigned (00) as default
Reserved --
ISDN DID/MSN
Reserved --
DCO DID DCO DID Line (This type will be valid in a few countries. For example,
Korea)
CO Line Attributes I (PGM141)
ITEM RANGE DEFAULT REMARK
CO Line
Group
00-25 01 Groups should be assigned according to
CO type and Class-Of-Service.
CO COS 1-5 1 -CO COS 1: no restriction
-CO COS 2: Exception Table A governs
-CO COS 3: Exception Table B governs
-CO COS 4: restricts Long Distance Code
-CO COS 5: overrides STA. COS 2,3,4
and 5, 6.
DISA Account
Code
ON/OFF ON When accessing another CO line in the
system by DISA line, you should enter
authorization code if this flag is set.
CO Line
Assign
POL/LOOP LOOP Polarity Reverse, Loop Start
To Next Page
Loading...
