CO Related Admin (PGM 140/141/142/143/146/147) 2-45
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
CO Line Type PBX/CO CO When marked PBX, a 1 or 2 digit dial code
may be entered, after which toll restriction
is applied.
CO Line
Signal Type
DTMF/PULSE DTMF --
Flash Type GROUND/
LOOP
LOOP --
UNA ON/OFF OFF The allowance of Universal Night Answer
service
CO Line
Group
Account
ON/OFF OFF --
CO Tenancy
Group
0-5 5 Tenancy Group of CO line.
CO Line Attributes II (PGM142)
ITEM RANGE DEFAULT REMARK
CO Line
Name Display
ON/OFF OFF If CO Line name is assigned at BTN2, and
this field is ON, CO name is displayed for
CO incoming calls
CO Line
Name Assign
Max 12
characters
-- --
Metering Unit 00-06 00 There are 7 metering signal types:
- 0: None
- 1: 50 Hz
- 2: 12 KHz
- 3: 16 KHz
- 4: Singular Polarity Reverse (SPR)
- 5: Plural Polarity Reverse (PPR)
- 6: No Polarity Reverse (NPR)
CO Line Attributes I (PGM141)
ITEM RANGE DEFAULT REMARK