EasyManua.ls Logo

Vertical SBX IP - Page 226

Vertical SBX IP
338 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CO Related Admin (PGM 140/141/142/143/146/147) 2-46
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
Line Drop
Using CPT
ON/OFF OFF If this field set to ON, CPT checks the
incoming CO line when answered and if
CPT detects dial tone, then the system
drops the line for toll restriction.
CO Distinct
Ring
0-4 0 The CO can have a specific ring signal to
stations in the system through this field’s
setting. This ring type can be programmed
at PGM422.
CO Line MOH 0-9 1 0: Not assigned by this field.
1: Internal Music
2: External Music
3: Reserved
4-8: SLT MOH
9: HOLD Tone
PABX CO Dial
Tone
YES/NO YES YES: PX or PABX provides dial tone.
NO: PX or PABX does not provide dial
tone. System provides dial tone
PABX CO
Ring Back
Tone
YES/NO NO If R2 PX which does not give us tone for
called party status exists, then the system
provides tone according to cause value
(This field is only when Cause means that
Ring back is provided by PX.).
YES: PX, NO: System
PABX CO
Error Tone
YES/NO NO If R2 PX which does not give us tone for
called party status exists, then the system
provides tone according to cause value
(This field is only when Cause means that
error tone is provided by PX.).
YES: PX, NO: System
PABX CO
Busy Tone
YES/NO NO If R2 PX which does not give us tone for
called party status exists, then the system
provides tone according to cause value
(This field is only when Cause means that
busy tone is provided by PX.).
YES: PX, NO: System
CO Line Attributes II (PGM142)
ITEM RANGE DEFAULT REMARK
Release 3.5
June 2010

Table of Contents

Related product manuals