Station Group Assign (PGM 190/191) 2-98
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
Music Source 0-9 0 (not
assigned)
If music source is assigned, calling user will be heard
music instead of ring back tone.
0: Not Assigned 1: Internal Music
2: External Music 1 3: Reserved
4: SLT 1 5: SLT 2
6: SLT 3 7: SLT 4
8: SLT 5 9: Hold Tone
Alternate Destination Sta No/
Hunt No
-- When a call comes into the group and there is no
available station in the group, then the call will be routed
to this destination, if assigned.
Max Queue Call Count 00-99 99 This value is the maximum call count that can be queued.
If the total queued call count is this value, the next
queuing tried call will be disconnected
Member Forward ON/OFF ON If this value is set to ON, members will be forwarded.
Queue Count Display ON/OFF ON If this value is set to ON, a Hunt member can check the
Queue Count.
UCD Group Attributes (PGM 191)
ITEM RANGE DEFAULT REMARK
VMIB Announce 1 Timer 000-999 015
(sec)
If all stations in the group are busy when a call is received
for the group, the call may continue to wait (queue) for an
available station in the group. If queued, the call may be
sent to a UCD announcement when the queue period
exceeds the 1st announcement Timer. If the timer is set to
000 the call will receive the full first announcement prior to
the hunting process (guaranteed announcement).
VMIB Announce 2 Timer 000-999 000
(sec)
The second announcement can be provided if the call
continues to wait beyond the 2nd announcement timer.
VMIB Announce
Location 1
00-70 00 (not
assigned)
Each Station Hunt Group can be assigned an
announcement, which is played when the call is first
received. The announcement may be assigned as VMIB.
Circular/Terminal Group Attributes (PGM 191)
ITEM RANGE DEFAULT REMARK
To Next Page
Loading...
