Station Group Assign (PGM 190/191) 2-100
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
Supervisor Call Count 00-99 00 If the number of queued calls is more than this call count,
the supervisor timer will be started.
UCD Queued Call
(Reserved)
ON/OFF ON (Reserved)
Max Queue Call Count 00-99 00 This value is the maximum call count that can be queued.
If the total queued call count is this value, the next
queuing tried call will be disconnected
Supervisor Sta # -- Supervisor station number
UCD Hunt Stations’
Priority
0-9 0 UCD group member’s priority
Member Forward ON/OFF ON If this value is set to ON, members will be forwarded.
UCD DND Ring Timer 000-999 000
(sec)
If this timer set to 000 sec, this timer is not operated. If this
timer is set to 010, after 10 seconds ringing the UCD
member is automatically in a UCD DND state.
UCD Queued Tone ON/OFF OFF --
Ring Group Attributes (PGM 191)
ITEM RANGE DEFAULT REMARK
VMIB Announce 1 Timer 000-999 015
(sec)
If this timer expires after a call comes into the group, the
system announces the greeting, if one exists.
VMIB Announce 2 Timer 000-999 000
(sec)
If this timer expires after call come in the group, the
system announces the VMIB if assigned.
VMIB Announce
Location 1
00-70 00 (not
assigned)
This is used to announce greeting when the VMIB
announce 1 timer expires.
VMIB Announce
Location 2
00-70 00 (not
assigned)
This is used to announce VMIB when the VMIB announce
2 timer expires.
VMIB Announce 2 Repeat
Timer
000-999 000
(sec)
The VMIB announce 2 is repeated when this timer expires
(000 = not assigned).
VMIB Announce 2 Repeat
Enable/Disable
ON/OFF OFF This is used to enable or disable the VMIB Announce 2
Repeat.
UCD Group Attributes (PGM 191)
ITEM RANGE DEFAULT REMARK
To Next Page
Loading...
