Vertical SBX IP - Page 43

Station ID Assignment (PGM 110/111/112/113/114) 1-29
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
Sub Address 0-2 0 This field indicates how the sub-address is used in the SETUP
message.
0: Station sub-address not used.
1: Sub-address is filled in the CPN field of SETUP message.
2: Sub-address is filled in the CPSN (Called Party Sub-address
Number) field of SETUP.
DISA
Restriction
ON/OFF OFF If this value is set to ON, the station is restricted to receive the DISA
incoming call.
CLI Name
Display
ON/OFF OFF If this field is ON, the system checks whether the received CLI
matches speed dial data. If they match, the speed dial name displays.
ISDN CLI STA Max 4
digits
Logical
STA No.
If outgoing CLI is active and CLI type is EXT, this field used when
make outgoing CLI.
Progress
Indication
ON/OFF OFF If this field is set to ON and an SLT seizes an ISDN line, the progress
indication IE that indicates the originator is non-ISDN device is made
in the SETUP message.
ISDN CLIR ON/OFF OFF If this field is set to ON, does not send CLI Information and restrict PX
send it
ISDN COLR ON/OFF OFF If this field is set to ON, does not send CLI Information and restrict PX
send it
DID
Restriction
ON/OFF OFF Restrict the DID Call
DID Call Wait ON/OFF OFF New DID Call waiting indicator
CLI Type 0-1 0 1: Long: Use station CLI with PGM114-BTN19. (max 12)
0: Short: Use station CLI with PGM114-BTN12 (max 4)
Long Station
CLI
Max 12
Digits
Logical
STA No.
If outgoing CLI is active and CLI type is EXT, this field used when
making outgoing CLI
MSN Wait ON/OFF OFF New virtual MSN call waiting enable
Long CLI 1 Max 16
Digits
Long
CLI 1
Long CLI 2 Max 16
Digits
Long
CLI 2
CC Blocking ON/OFF ON
ISDN Station Attributes (PGM114)
ITEM RANGE DEFAULT REMARK
Release 3.5
June 2010