System Attributes (PGM 160/161/163) 1-70
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
LCR Dial Tone
Detect
ON/OFF OFF If this value is set to ON, the SBX IP
system first checks if the CO provides dial
tone in case an analog CO line is seized
for LCR dialing. If there is no dial tone, the
call is rerouted to the Alternate DMT index.
If the LCR type is set to M13, the LCR dial
tone detect option is not applied.
Transit Out
Check for
Security
ON/OFF OFF --
System Attributes III (PGM163)
ITEM RANGE DEFAULT REMARK
Alarm Enable ON/OFF OFF --
Alarm Contact
Type
CLOSE/OPEN CLOSE --
Alarm Mode ALARM/
BELL
ALARM --
Alarm Signal
Mode
RPT/ONCE RPT --
System Attributes II (PGM161)
ITEM RANGE DEFAULT REMARK
To Next Page
Loading...
