Chapter 1 Introduction ALPHA V40
Version 18.07.06
9
1. Introduction
The ALPHA V40 incorporates a label applicator with controller unit. The
applicator is designed to accommodate a few different types of applicators
(Wipe-On- or Tamp applicators and Blow Box). This chapter covers the
purpose and scope of this manual, the conventions used to convey information and the manual
outline. Customer Support information is located at the end of this chapter.
Purpose and Scope of this Manual
This User’s Manual is designed for users who will be performing the following tasks:
• Machine installation with supplier support
• Machine setup and configuration
• Machine operation
• Machine troubleshooting and maintenance
This manual is designed to provide procedures and reference material needed to complete the
tasks mentioned above. All operators should be familiar with the conventions and guidelines
outlined below before performing any of these procedures.
NOTE : For spare parts lists please refer to the appendix documentation
with part number 32708118.
Overview
To Next Page
Loading...
Need help?
General