wsm M7060 - Page 106

GENERAL
M6060, M7060, WSM
G-83
Valve Adaptor
Application
• Use for measuring the system pressure of shuttle valve, system
pressure relief pressure, 4WD valve, PTO valve and dual hi-lo
valve.
NOTE
• The following special tool is not provided, so make it
referring to the figure.
9Y1210828GEG0117US0
Hydraulic Brake Adaptor
Application
• Use for testing the hydraulic brake oil linkage.
NOTE
• The following special tool is not provided, so make it referring to the figure.
9Y1210828GEG0118US0
A 24 mm (0.94 in.)
B 27.7 mm (1.09 in.)
C PS1/4
D 11 mm (0.43 in.)
E 15 mm (0.59 in.)
F 40 mm (1.57 in.)
G 60 mm (2.36 in.)
H 15 mm (0.59 in.)
I PT1/8
J 4 mm dia. (0.15 in. dia.)
C1 Chamfer 1 mm (0.039 in.)
C2 Chamfer 2 mm (0.079 in.)
A 18 mm (0.71 in.) G PS 1/4 M 4 mm (0.16 in.)
B 15 mm (0.59 in.) H M7 × P1.0 N 2 mm (0.079 in.)
C 15 mm (0.59 in.) I 0.79 rad (45 °) O 2 mm dia. (0.079 in. dia.)
D 3 mm (0.12 in.) J 0.79 rad (45 °) P 5 mm dia. (0.20 in. dia.)
E 0.79 rad (45 °) K 6 mm (0.24 in.) Q 17 mm (0.67 in.)
F 0.52 rad (30 °) L 5 mm (0.20 in.) R 19.6 mm (0.77 in.)
KiSC issued 08, 2013 A