wsm M7060 - Page 618

CABIN
M6060, M7060, WSM
9-S36
Wiring Harness for Tractor Front Side
1. Remove the engine ECU cover (1).
2. Let the red handles of engine ECU be rotated 0.79 rad (45 °)
and disconnect the 96P connector (2) and 58P connector (3).
3. Remove the relays (4).
4. Remove the relay (5).
5. Disconnect the ground wires (6).
NOTE
• Do not be rotated over 0.79 rad (45 °). The red handle may
be damaged.
9Y1210828CAS0060US0
Hose
1. Disconnect the 5P connector for mass air flow sensor (1) and
the air cleaner hose (2).
2. Disconnect the hose (3).
9Y1210828CAS0061US0
(1) Engine ECU Cover
(2) 96P Connector (Engine ECU)
(3) 58P Connector (Engine ECU)
(4) Relay (CRS)
(5) Relay (Starter)
(6) Ground Wire
(1) Mass Air Flow Sensor
(2) Air Cleaner Hose
(3) Hose
KiSC issued 08, 2013 A