X-IO ISE-2 Series - Page 168

Page 160 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide Appendix C: CLI Commands
--autopresent=<Enable|Disable>
--upsmode=<Enable|Disable>
--fcspeed=<Auto|1|2|4>
Network parameters can be any of the following:
--dhcp=<Enable|Disable>
--wol=<Enable|Disable>
--ipaddress1=x.x.x.x
--netmask1=x.x.x.x
--gateway1=x.x.x.x
--ipaddress2=x.x.x.x
--netmask2=x.x.x.x
--gateway2=x.x.x.x
Time parameters can be any of the following:
--date=DD-MMM-YYYY
--time=HH:MM:SS
--timezone=<Zone>
--dst
Also see: timezone
Available time zones:
WET - Western Europe Time GST - Guam Standard Time
CET - Central Europe Time KST - Korea Standard Time
EET - Eastern Europe Time SBT - Solomon Islands Time
MSK - Moscow Time NZST - New Zealand Standard Time
AST - Arabian Standard Time IDLE - International Date Line East
IST - Iran Standard Time IDLW - International Date Line West
GST - Gulf Standard Time SST - Samoa Standard Time
PKT - Pakistan Time HST - Hawaii Standard Time
IST - India Standard Time AKST - Alaska Standard Time
BDT - Bangladesh Time PST - Pacific Standard Time
THA - Thailand Standard Time MST - Mountain Standard Time
CCT - China Coast Time CST - Central Standard Time
SGT - Singapore Standard Time EST - Eastern Standard Time
HKT - Hong Kong Time AST - Atlantic Standard Time
MYT - Malaysia Time NFT - Newfoundland Time
AWST - Australian Western Time BST - Brazil Standard Time
ACST - Australian Central Time VTZ - Greenland Eastern Standard Time
AEST - Australian Eastern Time AZOT - Azores Time
JST - Japan Standard Time