X-IO ISE-2 Series User Manual

Details document conventions and lists related X-IO publications for further information.

Highlights key advanced features of the ISE storage system, such as managed reliability and high-performance I/O.

Describes the major hardware components of the ISE, including DataPacs, MRCs, power supplies, and chassis.

Covers general hazards, operating temperature, airflow, loading, electrical safety, and emissions compliance.

Details the process of installing the ISE chassis into a server rack using custom rail kits.

Provides instructions for installing DataPacs, supercapacitors, power supplies, MRCs, and the bezel.

Explains recommended cabling, SAN, DAS connectivity, and specific ISE connectors like SFP.

Guides through initial power-on, obtaining IP addresses, and network settings configuration.

Introduces the three primary management methods: Orchestrator, Web-Mgt, and CLI.

Details how to log in to management interfaces, navigate, and manage system settings.

Explains connecting to and using the Command Line Interface for system management.

Describes ISE power states, shutdown, and restart procedures.

Covers ISE initialization, system parameter setup, volume, host, and mapping configuration.

Details managing system parameters, SNMP settings, and the ISE Analyzer Software Service.

Covers configuring, modifying, and deleting volumes, hosts, and LUNs.

Explains using the Systems Dashboard for monitoring status, storage, and performance across ISEs.

Covers firmware upgrades, MRC management, and system restarts/shutdowns.

Provides detailed steps for replacing Field Replaceable Units (FRUs) like SFPs, power supplies, and supercapacitors.

Offers solutions for common problems like ISE not visible to host and amber LED indicators.

Provides a concise summary of essential configuration steps for new users.

Details recovery techniques for unexpected conditions and hardware issues.

Lists and explains the Command Line Interface (CLI) commands and their options.