X-IO ISE-2 Series User Manual

Xiotech—Proprietary 160337-000 Rev D, 30 September, 2013 Page 117
Monitoring ISE User Guide
Table 37: Sample: Show MRC Console Print
DataPac Detailed
Enter the show datapac command in the CLI. The following information is displayed for each DataPac.
MRC-1
=======================================================================
Status
:
Operational (None)
Hardware Ver.
Position
:1
Firmware Ver.
: V1.0 (Developer1.3) Serial Number : 2BCC01NP
Part Number : 9BR004-982
FC Port Information
Status
: Operational
Type
: N Port
WWN
: 20000014C3673710
FC speed
: 4 Gb/S (Requested: Auto
oem:> show datapac
DataPac Information
======================================================================
DataPac-1 (Pool 1)
--------------------------------------------------------------------------
Status
: Operational (None)
Detailed Status
:
0x00000000
Position
: 1 Hardware Ver : hwr
Redundancy Health
: 125% (DataPac self-healing is in progress.)
Capacity
: 8678 GB Type : Unknown
Model
: Part Number : part1
Firmware Version
: 100 (4202) Cache Generation: 1
Temperature
: 31 C (Warning: 50 C, Critical: 60 C)
--------------------------------------------------------------------------
DataPac-2 (Pool 2)
--------------------------------------------------------------------------
Status
: Operational (None)
Detailed Status
:
0x00000000
Position
: 2 Hardware Ver : A
Redundancy Health
: 125% (DataPac self-healing is in progress.)
Capacity
: 8678 GB Type : Unknown
Model
: DP1000FC3-1 Part Number : part1

X-IO ISE-2 Series Specifications

General

Brand	X-IO
Model	ISE-2 Series
Category	Storage
Language	English