Page 72 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide ISE Management
Modify Subscription
The interval for Telemetry and General Update subscriptions can be modified. Alert subscriptions do not have
an interval.
Notes:
[1] The interval for Telemetry and General Update subscriptions can be modified, but Alert subscription inter-
vals cannot be modified.
[2] When creating or changing Telemetry update subscriptions, it is recommended that the interval be left at
1440. If a smaller interval is specified, the ISE can run out of resources and log the following event in the
SMGT event log:
General Telemetry request for <host> has failed with status code = 4 - No resources
Orchestrator
To modify ActiveWatch subscriptions using the Orchestrator, select
All Devices
>>
ise_name
>>
ActiveWatch
>>
Subscriptions
. (See the Orchestrator User Guide.)
Web-Mgt
To modify a subscription through the Web Interface:
1. Enter an
ISE Analyzer Software Service
IP address or DNS name.
2. Click
A
LERT to change an Alert subscription.
3. Click
G
ENERAL
U
PDATES to change a General Updates subscription.
4. Click
T
ELEMETRY to change a Telemetry subscription.
5. When prompted, enter the appropriate change.
6. Click
S
AVE
C
HANGES and the subscription modification is complete.
Command Line Interface
To modify a subscription with the CLI, use the subscribe add command with new settings for enabled or
interval. The subscription is modified with the settings included on the command line. In the following
example, the interval of a subscription to IP address 10.20.30.40 is changed from 1440 minutes to 720
minutes.
subscribe show
10.20.30.40:443, type=telemetry, enable=true, interval=1440, Last Sent= 14-Sep-2010
09:17:26
10.20.30.40:443, type=general update, enable=true, interval=1440, Last Sent= 14-Sep-
2010 09:17:26
10.20.30.40:443, type=alert, enable=true
subscribe add -ipaddress=10.20.30.40 -type=gupdate, -interval=720
subscribe show
10.20.30.40:443, type=telemetry, enable=true, interval=1440, Last Sent= 14-Sep-2010
09:17:26
10.20.30.40:443, type=general update, enable=true, interval=720, Last Sent= 14-Sep-2010
09:17:26
10.20.30.40:443, type=alert, enable=true
To Next Page
Loading...
General