Page 76 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide ISE Management
The
Detailed Volume Information
page appears with the volume names in the first column of the
Volume
Information
section below (see reference 2 in Figure 50).
Figure 50. Detailed Volume Information
Web-Mgt, Modify Volume
To modify volume configurations, open the
Detailed Volume Information
view (Figure 51 on page 77). From this
view the following modifications can be made to a volume:
• Change the volume name
• Change the cache policy
• View the pool, the RAID level, the capacity, the Global ID, and the Local ID of the volume
• Add and remove volume-host mapping schemes as detailed in “Modify Volume–Host Mappings” on
page 82
• Create or change a volume comment
• Delete a volume by selecting it and clicking
Delete
(bottom of the view)
• Add and remove host mappings
Note. A volume cannot be deleted with an active host mapping. Mappings can be removed through the
Available Hosts
and
Selected Hosts
options in this view.
To Next Page
Loading...
General