X-IO ISE-2 Series - Appendix C: CLI Commands

Xiotech—Proprietary 160337-000 Rev D, 30 September, 2013 Page 159
Appendix C: CLI Commands ISE User Guide
Appendix C: CLI Commands
This Appendix lists the ISE Command Line (CLI) commands and options.
--- Command Line Interpreter Command Set Summary ---
initialize <options> - Initialize the ISE
reformat ise - Return ISE to pre-initialized state
configure <option> - Configure ISE parameters
show <component> - Display information
help <subject> - Display help
version - Display SCLI version information
create <options> - Create a host or volume
delete <options> - Remove a host or volume
modify <options> - Modify a host or volume
present <options> - Present a volume to a host
unpresent <options> - Unpresent a volume from a host
<options> - Flash LEDs on the ISE to
restart - Reboot the ISE
shutdown - Shut down the ISE
add - Add a DataPac or MRC
remove - Remove a DataPac or MRC
exit/quit - Exit from the CLI
subscribe - ...
unsubscribe - ...
See 'help help' for more detailed information on the help system.
Configure
Sets or changes user settable parameters.
Usage: configure --<parameter>=<value>
ISE parameters can be any of the following:
--name=<string>
--address=<string>
--location=<string>
--contact=<string>
--phone=<string>
--email=<string>