Xiotech—Proprietary 160337-000 Rev D, 30 September, 2013 Page 27
Installation ISE User Guide
Web Management Interface
The Web Management Interface, described throughout this document, is used to configure, monitor, and man-
age the ISE.
Command Line Interface
The Command Line Interface, described throughout this document, can be used to configure, monitor, and
manage the ISE.
Additional Options
There are a number of additional options available for the ISE. Some of these (see “Related Documents” on
page 1) are:
• ActiveWatch—Part of an available
X-IO
Customer Support service
• ISE Analyzer—Appliance and Graphical User Interface for access to real-time and historical status,
configuration, and performance data from multiple ISEs
• ISE Mirroring
• ISE Multipath Suite
• ISE Manager
Initialize–Configure the ISE
Refer to sections “Power-up, Shutdown, Restart” on page 37 and “Initialize and Configure” on page 41 for
detailed instructions on how to initialize and configure the ISE.
To Next Page
Loading...