Page 162 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide Appendix C: CLI Commands
Exit/Quit
This command closes the CLI.
Usage: exit or quit
Help
Displays on-line help.
Usage: help <subject>
<subject> can be any of the commands or 'all'.
Initialize
Initializes the ISE and configures any available DataPacs into pools.
Usage: initialize [options]
options include:
--sparelevel=<10|20>
Present
Adds a presentation.
Usage: present --host=<host name> [<vol0>[:<L0>] ... ]|--all
present --volume=<volume name> [<host0>[:<L0>] ... ]|--all
The present command presents a host to a list of volumes or
a volume to a list of hosts.
To present a volume to a list of hosts, use:
present --volume=<name> host0 host1
To present a host to a list of volumes, use:
present --host=<name> vol0 vol1
To specify explicit LUN values, add :<LUN> to each name in the list
(e.g., host0:1 host1:5 or v0:4 v1:1).
The list can be replaced with '--all' to present a host to all
volumes or a volume to all hosts. (e.g., present --host=host1 --all).
Unpresent
Removes a presentation.
Usage: unpresent --host=<host name> [<vol0> ... ]|--all
unpresent --volume=<volume name> [<host0> ... ]|--all
The unpresent command removes hosts or volumes from a
presentation.
To unpresent hosts from a volume, use:
unpresent --volume=<name> host0 host1
To Next Page
Loading...