Page 164 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide Appendix C: CLI Commands
Reformat Ise
Returns the ISE to its pre-initialized state, provided that
no volumes are defined. Reformatting an ISE removes all stored data.
Usage: reformat ise
Version
Displays version information.
Usage: version
Add
Adds DataPac or MRC to the system.
Usage: add --status
Displays the current Add status for Datapacs and MRCs.
Usage: add --datapac1
Adds Datapac1 to the system.
Usage: add --datapac2
Adds Datapac2 to the system.
Usage: add --mrc1
Adds MRC1 to the system.
Usage: add --mrc2
Adds MRC2 to the system.
Remove
Removes a Datapac or MRC from the system.
Usage: remove --status
Displays the current Remove status for Datapacs and MRCs.
Usage: remove --datapac1 [--erase]
Removes Datapac1 from the system. If the --erase option is specified,
the Datapac will be securely erased.
Usage: remove --datapac2 [--erase]
Removes Datapac2 from the system. If the --erase option is specified,
the Datapac will be securely erased.
Usage: remove --mrc1
Removes MRC1 from the system.
Usage: remove --mrc2
Remove MRC2 from the system.
Subscribe
To Next Page
Loading...
General