Xinje XD Series User Manual

114
2)Operands
Operands
Function
Data Type
D1
Start soft element address
bit
D2
End soft element address
bit
3) Suitable soft components
Operan
ds
Word soft elements
Bit soft elements
System
Consta
nt
Module
System
D
F
D
T
D
C
D
D
X
D
Y
D
M
D
S
K/H
I
D
Q
D
X
Y
M
S
T
C
Dn.
m
D1
●
●
●
●
●
●
D2
●
●
●
●
●
●
*Notes: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS. M includes M,HM,SM；S includes S,HS；T
includes T,HT；C includes C, HC.
MSET M10 M120
D1· D2·
X0

Set the coil from M10 to M120.

、 are specified as the same type of soft component, and <

When >, will not run Zone set, but set SM409 SD409 = 2
4-5-10 Zone reset [ZRST]
1)Summary
Reset the soft element in the certain range
Multi-reset [ZRST]
16 bits
ZRST
32 bits
-
Execution
condition
Normally ON/OFF, falling
or rising pulse edge
Suitable
Models
XD, XL
Hardware
requirement
-
Software
requirement
-
2) Operands
Operands
Function
Data Type
D1
Start address of soft element
Bit,16 bits,BIN
D2
End address of soft element
Bit,16 bits,BIN
3) Suitable soft components
Set ON M10~M120
Description
D2·
D1·
D2·
D1·
D2·
D1·
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)