Xinje XD Series - 4-3-2 Call subroutine [CALL] and Subroutine return

86
CJ P6
X0
( )
Y0
X1
( )
T246
R
X2
TMR T246 K1000 K10
X3
MOV K3 D0
X4
P6
CJ P7
X0
( )
Y0
X5
P7
( )
T246
R
X6
4-3-2 Call subroutine [CALL] and Subroutine return [SRET]
1)Summary
Call the programs which need to be executed together, decrease the program's steps;
Subroutine Call [CALL]
16 bits
CALL
32 bits
-
Execution condition
Normally
ON/OFF,
Rising/Falling
edge
Suitable Models
XD, XL
Hardware requirement
-
Software requirement
-
Subroutine Return [SRET]
16 bits
SRET
32 bits
-
Execution condition
-
Suitable Models
XD, XL
Hardware requirement
-
Software requirement
-
2)Operands
Operands
Function
Data Type
Pn
Jump to the target (with pointer No.) P
(P0~P9999)
Pointer's No.
3) Suitable Soft Components
Others
Pointer
P
I
●
 In the left graph, Y0 becomes to be
dual coil output, but when X0=OFF, X1
activates; when X0=ON, X5 activates
 CJ can’t jump from one STL to another
STL;
 After driving timer T0~T575,
HT0~HT795 and HSC0~HSC30, if
executes CJ, continue working, the
output activates.
 The Tag must be match when using CJ
instruction.
Description
tudonghoatoancau.com