EasyManuals Logo

Xinje XD Series User Manual

Xinje XD Series
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
170
Compare the source data with the range
EZCP D10 D20 D0
M3
M4
M5
X0
S1· S2·
M3
S3·
Compare the source data S3 to the upper and lower limit value of the range S1~S2.
The result will store in three coils starting from D.
Constant K and H will transform to binary floating value when they are source data.
EZCP K10 K2800 D5 M0
X0
Note: the compare value must be floating numbers, otherwise the result will be error.
4-9-3 Floating Addition[EADD,EDADD]
1) Summary
Floating Add [EADD, EDADD]
16 bits
-
32 bits
EADD
Execution
condition
Normally ON/OFF,
rising/falling edge
Suitable
Models
XD, XL
Hardware
requirement
-
Software
requirement
-
64 bits
EDADD
Execution
condition
Normal ON/OFF/falling or
rising pulse edge
Suitable
Models
XDH, XLH
Hardware
requirement
Version V3.7.1 or later
Software
requirement
Version V3.7.4a or later
2) Operands
Description
(D1, D0) < (D11, D10) ON
Binary Floating Binary Floating
(D11, D10) (D1, D0 ) (D21, D20) ON
Binary Floating Binary Floating Binary Floating
(D1, D0) > (D21, D20) ON
Binary Floating Binary Floating
When X0 is OFF, even EZCP doesn’t run, M3~M5 will keep
the status before X0 is OFF.
(K10) : [D6,D5] : (K2800) M0, M1, M2
Binary converts Binary Floating Binary converts
to Floating to Floating
Please set S1≤S2, when S2< S1, make S2 as the same value to S1.
tudonghoatoancau.com

Table of Contents

Other manuals for Xinje XD Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xinje XD Series and is the answer not in the manual?

Xinje XD Series Specifications

General IconGeneral
Input Voltage24V DC
Storage Temperature-20°C to 70°C
Protection ClassIP20
TypePLC
SeriesXD
Programming LanguageLadder Logic, Instruction List
Communication InterfaceRS232, RS485
Power Supply24V DC
Digital InputsAvailable (number varies by model)
Digital OutputsAvailable (number varies by model)
Analog InputsAvailable (number varies by model)
Analog OutputsAvailable (number varies by model)
Output TypeRelay, Transistor
Number of InputsVaries by model (see Digital Inputs and Analog Inputs)
Number of OutputsVaries by model (see Digital Outputs and Analog Outputs)
Operating Temperature0°C to 50°C
Humidity5% to 95% (non-condensing)