Xinje XD Series User Manual

104
S2
●
●
●
●
●
●
●
●
●
S
●
●
●
●
●
●
●
●
●
D
●
●
●
*Notes: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS. M includes M,HM,SM；S includes S,HS；T
includes T,HT；C includes C, HC.
 Compare with and , output the three results starting from
 , ＋1, ＋2 : store the three results.
4-5-3 MOV [MOV, DMOV, QMOV]
1) Summary
Move the specified data to the other soft components
MOV [MOV,DMOV,QMOV]
16 bits
MOV
32 bits
DMOV
Execution
condition
Normally ON/OFF,
rising/falling edge
Suitable Models
XD, XL
Hardware
requirement
-
Software
requirement
-
64 bits
QMOV
Execution
condition
Normal ON/OFF/falling or
rising pulse edge
Suitable Models
XDH, XLH
Hardware
requirement
Version V3.7.1 or later
Software
requirement
Version
V3.7.4a or later
D·
Even X0=OFF stop ZCP instruction, M0~M2
will keep the original status
Description
S·
D·
D·
D·
S1
S2
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)