Xinje XD Series User Manual

150
*Notes: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS. M includes M, HM, SM; S includes S, HS; T
includes T, HT; C includes C, HC.
<32 bits instruction>
<64 bits instruction>
 The binary source number is converted into a BIN integer and stored at the destination device.
Abandon the value behind the decimal point.
 The inverse instruction is DFLTD/QFLTD.
 For 64-bit instructions, the register address number must be even.
 When the result is 0, the flag bit is ON.
 The result is over below data, the carry flag is ON.
64 bits operation: -9223372036854775808~9223372036854775807。
4-8-7 Single precision floating point to double precision floating point[ECON]
1) Summary
Single precision floating point to double precision floating point [ECON]
32 bits
DINTD
Execution
condition
Normal ON/OFF/falling
or rising pulse edge
Suitable Models
XDH、XLH
Hardware
requirement
Version V3.7.1 or later
Software
requirement
Version V3.7.4a or later
2) Operands
Operands
Function
Data Type
S
Source soft element address
32 bits, BIN
D
Target soft element address
64 bits, BIN
3) Suitable soft components
Operands
Word soft elements
Bit soft elements
System
Constant
Module
System
(D13,D12,D11,D10) → (D21,D20)
Binary Float BIN integer
Give up the data after the decimal dot
(D13,D12,D11,D10)→ (D23,D22,D21,D20)
Binary Float BIN integer
Give up the data after the decimal dot
Description
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)