Xinje XD Series User Manual

95
XCH D1[D21] D2[D21] //exchange the two neighbouring data
LD SM0 //M8000 is always ON coil
INC D21 //increase one for D21
MCR //
NEXT //match the second FOR
MCR //
NEXT //match the first FOR
4-3-5 [FEND] and [END]
1)Summary
FEND means the main program ends, while END means program ends;
main program ends [FEND]
Execution
condition
-
Suitable Models
XD, XL
Hardware
requirement
-
Software
requirement
-
program ends [END]
Execution
condition
-
Suitable Models
XD, XL
Hardware
requirement
-
Software
requirement
-
2)Operands
Operands
Function
Data Type
None
-
-
3)Suitable Soft Components
Even though [FEND] instruction represents the end of the main program, the function is same
to END toprocess the output/input, monitor the refresh of the timer, return to program step0.
None
Description
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)