Xinje XD Series User Manual

346
8-8-7-7 Set Global Library Directory
There are three methods to set the global library:
Method 1:Open the library management interface (please refer to 8-8-7-1. Library manager
for specific steps). If the global library directory has not been set, the prompt to set the global
library directory will appear.
Method 2:In the process of creating a new global library, if the global library directory has not
been set, the same prompt as method 1 will appear. You can set the path in the "Change
Function Library Default Path" pop-up window.
Method 3:Open "Library manger" interface,please refer to 8-8-7-1. Library manager and
click "Settings" - > "Global Library Directory" as shown below:
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)