Xinje XD Series User Manual

147
 The inverse transformation instruction is INT.
 FLTD can change the64 bits integer to32 bits floating value.
 The S operand of the FLTD instruction does not support constant K/H.
FLT D0 D10
X0
D0 is integer 20, after executing the instruction, D10 is floating value 20.
Note: Before using floating number operation instructions such as EADD, ESUB, EMUL,
EDIV, EMOV and ECMP, make sure that all operation parameters are floating number.
4-8-4 Integer to double precision floating point[DFLTD,QFLTD]
1) Summary
integer to double precision floating point[DFLTD,QFLTD]
32 bits
DFLTD
64 bits
QFLTD
Execution
condition
Normal ON/OFF/falling
or rising pulse edge
Suitable Models
XDH、XLH
Hardware
requirement
Version V3.7.1 or later
Software
requirement
Version V3.7.4a or later
2) Operands
Operands
Function
Data Type
S
Source soft element address
32 bits/64 bits, BIN
D
Target soft element address
64 bits, BIN
3) Suitable soft components
Operan
ds
Word soft elements
Bit soft elements
System
Consta
nt
Modul
e
System
D
F
D
T
D
C
D
D
X
D
Y
D
M
D
S
K/H
I
D
Q
D
X
Y
M
S
T
C
Dn.
m
S
●
●
D
●
*Notes: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS. M includes M, HM, SM; S includes S, HS; T
includes T, HT; C includes C, HC.
<32 bits instruction >
(D11,D10,)→(D15,D14,D13,D12)
BIN integer Binary float point
Description
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)