336
8-8-3-4 Create new header
In the "Project" toolbar on the left, select the project library or global library to which the
source file needs to be added in the "Function Library", right-click and select "New header
file" to edit the name of the header file in the pop-up interface, as shown in the following
figure:
8-8-4 Edit
8-8-4-1 Edit library information
Click "project library" or "global library" in the project bar on the left to edit the information,
and you can view and edit the basic information / file information / restriction information of
the library in the pop-up library information interface:
tudonghoatoancau.com
To Next Page
Loading...