Xinje XD Series User Manual

385
rotation), the result is shaft rotate numbers per second (float number).
3. Calculate the diameter of the transmission shaft and save in register D6 (float
number), then calculate the transfer distance per second and save in D10 (float
number).
4. the transfer distance per second multiply by 60 is the speed (m/min).
10-3 Precise Timing [STR]
1) Summary
Read and stop precise timing when precise timing is executed
Precise timing[STR]
16 bits
instruction
-
32 bits
instruction
STR
execution
condition
edge activation
suitable
models
XD/XL (except XDH,XLH)
hardware
requirement
-
software
requirements
-
2)Operands
Operands
Function
Type
D1
Timer Number
bit
D2
specify timer’s value or soft component’s ID
number
32 bits, BIN
3)Suitable Soft Components
Operan
ds
Word soft elements
Bit soft elements
System
Consta
nt
Module
System
D
F
D
T
D
C
D
D
X
D
Y
D
M
D
S
K/H
I
D
Q
D
X
Y
M
S
T
C
Dn.
m
D
●
D1
●
D2
●
●
●
●
●
*Note: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD;
DM includes DM, DHM; DS includes DS, DHS. M includes M, HM, SM; S includes S and
HS; T includes T and HT; C includes C and HC.
<Precise timing>, <Precise timing reset>
Function
and Action
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)