Xinje XD Series User Manual

360
Meantime, a new sequence block is added in the left of the project bar:
9-2-2 Move the BLOCK
If you want to move the BLOCK to other place, you have to select the original BLOCK and
delete it (select all, then delete):
Move the cursor to the new place, and then right click the BLOCK and select ‘add to lad’:
Now the BLOCK is moved to the new place:
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)