Xinje XD Series User Manual

173
<32 bits operation>
ESUB D10 D20 D50
S1· S2· D·
X0
<64 bits operation>
 The binary floating value S1 subtract S2, the result is stored in the target address.
 If a constant K or H used as source data, the value is converted to floating point before the
subtraction operation.
<32 bits operation>
ESUB D100K1234 D110
X1
<64 bits operation>
 The source data and result address can be the same. Please note that when X0 is ON, the
instruction will be executed in every scanning period.
 Note: the operand value must be floating numbers, otherwise the result will be error.
Description
(D11,D10) － (D21,D20) → (D51,D50)
Binary Floating Binary Floating Binary Floating
(K1234)
－
(D101, D100) → (D111, D110)
Binary converts to Floating Binary Floating Binary Floating
(D13, D12,D11, D10)－(D23,D22,D21,D20) →(D53, D52,D51, D50)
Binary Floating Binary Floating Binary Floating
(D13, D12,D11, D10)－(D23,D22,D21,D20) →(D53, D52,D51, D50)
Binary converts to Floating Binary Floating Binary
Floating
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)