Xinje XD Series User Manual

330
(2) Local code auto format
 Auto format completed statements when entering ‘;”
When the user enters the character ";" format the statement of the current row.
 Auto format completed sequence when entering “}”
When the user enters "}", format the contents in "{}".
(3) Handling special characters
The full width characters entered by the user into the editor need to be converted to half
width characters because they are not recognized by the compiler.
(4) Auto complete code
When the user inputs characters, the code prompt function will give certain prompts to
help the user input and complete the code.
 Submit
When the user press Enter or “;”, the currently edited code will be submitted to the
analyzer for analysis and a list of code tips will be generated.
 Prompt
When the user inputs characters, the code prompt control will pop up automatically to
match the user's input and give a prompt.
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)