Xinje XD Series User Manual

370
(4)The SKIP condition only can use M, X, can not use other coil or register.
NO(×)
YES(√)
(5)The output instructions cannot be CNT_AB(CNT), PWM.
NO(×)
YES(√)
(6)BLOCK is not recommended to put in the STL, because if one STL ends, while the
BLOCK doesn’t end, then big problem will happen.
NO(×)
YES(√)
SM0
SBLOCK
FROM K0 K1 K5 D100
WAIT K1 K50
STL S0
SBLOCKE
M100
( )
STLE
Y0
PLSR HD0 HD100 K1 Y0
S0
SBLOCK
FROM K0 K1 K5 D100
WAIT K1 K50
STL S0
SBLOCKE
M100
( )
STLE
Y0
PLSR HD0 HD100 K1 Y0
(7)Label Kind type cannot be used in the block
Sign P, I cannot be used in block. Even they can be added in block, but they do not work in
fact.
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)