Xinje XD Series User Manual

49
Note: For XD5 firmware version V3.4.6 and above, data register D ranges from D0 to
D69999;
XD5 firmware version below V3.4.6, and data register D ranges from D0 to D59999.
Data register is used to store data; it includes16 bits(the higheset bit is sign bit) and32 bits.
(32 bits contains two registers, the highest bit is sign bit)
16-bits register range is -32,768 ~ +32,767
Read and write the register data through instruction or other device such as HMI.
Sign bit
b
0
0
0
0
0
1
0
1
0
0
1
1
0
0
0
0
0
b
15
0: positive 1: negative
32 bits value is consisted of two continuous registers. The range is -2147483648 ~
2147483647. For example: (D1 D0) D1 is high16 bits, D0 is low16 bits.
For32 bits register, if the low 16-bits are appointed, such as D0, then D1 will be the high16
bits automatically. The address of low 16-bits register must be even number.
Sign bit
b
0
D116 bits
0
0
0
0
1
0
1
0
0
1
1
0
0
0
0
0
b
31
0: positive 1: negative
0
0
0
0
1
0
1
0
0
1
1
0
0
0
0
0
D016 bits
Low
High
 Normal type
Structure
Function
16 bits
D0 16-bits
32 bits
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)