Xinje XD Series User Manual

91
The program explanation:
When SM2 is ON, set ON flow S0. When
M0 is ON, set ON flow S10 and S20.
In S10 branch, it runs S10, S11 and S12. Set
on M1 means the S10 branch is finished.
In S20 branch, it runs S20, S21 and S22. Set
on M2 means the S20 branch is finished.
When both branch S10 and S20 end, set on
S30. When S30 end, reset S30.
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)