9Error
DX100 9.1 Error Message List
9-9
2390 - Wrong group axis selection
2400 - Cannot move in cut & paste editing
2410 - When variable is used for speed
setting, perform a line-edit
2420 - When variable is used for teach
setting, perform a line-edit
2430 - Reverse data not found
2440 - Move C-and W-axis to basic position Lazor cutting
2450 - Relative JOB not permitted
2460 - Specified JOB is already converted
2470 - Wrong JOB type
2480 - Wrong JOB coordinates setting
2490 - Execute FWD/BWD operation once
2500 - Cannot convert the JOB
2501 - Cannot convert positions as macro
arguments
2510 - Cannot correct position in the JOB
2520 - Enter JOB name
2530 - Illegal step number
2540 - Enter step number
2550 - Duplicated step number
2551 - Duplicated line number
2560 - Cannot correct steps of position
variables and REFP
2570 - The step does not contain speed
2580 - The step dose not contain PL/CONT
2590 - Soft limit range over
2600 - Cannot teach position in concurrent
JOB
2610 - Wrong JOB kind
2620 - Cannot correct play speed in the JOB
2630 - Conveyor position not reset
2640 - Incorrect JOB name
Error No. Data Error Message Contents