YASKAWA SVC - Page 559

10.5 Motion Parameter Details
10.5.3 Monitor Parameter List
10
Inverter Operation
10-57
IW45 Auxiliary User Constant Reading Data 2
Range: 0 to FFFFH
Displays the value read out by executing the
Read User Constant subcommand. Enabled
when Auxiliary Inverter User Constant Number
Size (OW43) = 2 to 4.
IW
46 Auxiliary User Constant Reading Data 3
Range: 0 to FFFFH
Displays the value read out by executing the
Read User Constant subcommand. Enabled
when Auxiliary Inverter User Constant Number
Size (OW43) = 3 or 4.
IW
47 Auxiliary User Constant Reading Data 4
Range: 0 to FFFFH
Displays the value read out by executing the Read
User Constant subcommand. Enabled when Auxiliary
Inverter User Constant Number Size (OW43) =
4.
IL
48 Fixed Parameter Monitor
Displays the fixed parameter value read out by
executing the Read Fixed Parameters subcom-
mand.
IW
4A
to
IW
5F
– Reserved
IW
60 Transmission Reference Input Data 0
Displays the 1st word in the response data (main
command bytes 0 and 1) when the Transmission
Reference command is executed.
IW61 Transmission Reference Input Data 1
Displays the 2nd word in the response data (main
command bytes 2 and 3) when the Transmission
Reference command is executed.
IW
62 Transmission Reference Input Data 2
Displays the 3rd word in the response data (main
command bytes 4 and 5) when the Transmission
Reference command is executed.
IW63 Transmission Reference Input Data 3
Displays the 4th word in the response data (main
command bytes 6 and 7) when the Transmission
Reference command is executed.
IW64 Transmission Reference Input Data 4
Displays the 5th word in the response data (main
command bytes 8 and 9) when the Transmission
Reference command is executed.
IW
65 Transmission Reference Input Data 5
Displays the 6th word in the response data (main
command bytes 10 and 11) when the Transmis-
sion Reference command is executed.
IW
66 Transmission Reference Input Data 6
Displays the 7th word in the response data (main
command bytes 12 and 13) when the Transmis-
sion Reference command is executed.
IW
67 Transmission Reference Input Data 7
Displays the 8th word in the response data (main
command bytes 14 and 15) when the Transmis-
sion Reference command is executed.
IW
68 Transmission Reference Input Data 8
Displays the 9th word in the response data (main
command bytes 16 and 17) when the Transmis-
sion Reference command is executed.
IW69 Transmission Reference Input Data 9
Displays the 10th word in the response data
(main command bytes 18 and 19) when the
Transmission Reference command is executed.
IW6A Transmission Reference Input Data 10
Displays the 11th word in the response data
(main command bytes 20 and 21) when the
Transmission Reference command is executed.
IW
6B Transmission Reference Input Data 11
Displays the 12th word in the response data
(main command bytes 22 and 23) when the
Transmission Reference command is executed.
IW6C Transmission Reference Input Data 12
Displays the 13th word in the response data
(main command bytes 24 and 25) when the
Transmission Reference command is executed.
Continued on next page.
Continued from previous page.
Register
No.
Name Description