IM 701240-01E
5-34
Setting the Input Conditions
5. As necessary, use jog shuttle+SELECT to set the items of the preset (Logic 5V
to EM Pickup) that you selected in step 4. If you select User (user-defined), all
the setup items can be set arbitrarily.
The Pull Up setup menu appears only
when you set the preset to Pull-up 5 V.
Voltage range
Input coupling
Probe type
Bandwidth limit
Threshold level
Hysteresis
Slope
Chatter elimination time
Selecting the Measurement Item
6. Press the FV Setup soft key. A setup dialog box opens.
7. Use jog shuttle+SELECT to select Function.
8. Use jog shuttle+SELECT to select the measurement item.
For the setup procedure of the selected measurement item, see the pages indicated
below.
• Frequency → Page 5-35
• Revolution (rpm) → Page 5-35
• Revolution (rps) → Page 5-35
• Period → Page 5-36
• Duty cycle → Page 5-36
• Power frequency → Page 5-37
• Pulse width → Page 5-37
• Pulse integration → Page 5-38
• Velocity → Page 5-38
Note
The Range unit and Offset unit are linked to the unit of the measurement item selected in step 8.
For the procedure to set the offset, see section 5.10.
5.17 Setting the Frequency (Number of Rotations, Period, Duty Cycle, Power Supply Frequency, Pulse
Width, Pulse Integration, and Velocity) Measurement
To Next Page
Loading...
