IM 701240-01E
5-36
Period
The procedure after selecting Period in step 8 on page 5-34 is explained below.
9. As necessary, use jog shuttle+SELECT to enter the smoothing filter, pulse
average, deceleration prediction, and stop prediction.
Smoothing filter
Moving average order of smoothing
Stop prediction
Deceleration prediction
Pulse average
Pulse average count
Setting the Measurement Range
10. Turn the RANGE knob to set the measurement range.
You can also set the measurement range by pressing the Range soft key and turning the
jog shuttle.
Duty Cycle
The procedure after selecting Duty in step 8 on page 5-34 is explained below.
9. Use jog shuttle+SELECT to select the polarity of the pulse to be measured
(Measure Pulse).
10. As necessary, use jog shuttle+SELECT to set the smoothing filter.
Smoothing filter
Moving average order of smoothing
Polarity of the measured pulse
Setting the Measurement Range
11. Turn the RANGE knob to set the measurement range.
You can also set the measurement range by pressing the Range soft key and turning the
jog shuttle.
5.17 Setting the Frequency (Number of Rotations, Period, Duty Cycle, Power Supply Frequency, Pulse
Width, Pulse Integration, and Velocity) Measurement
To Next Page
Loading...
