8-13
IM 701240-01E
8
9
10
11
12
13
14
15
16
17
18
App
Index
Waveform Display and Information Display
8.6 Displaying X-Y Waveforms
<For a description of this function, refer to page 2-35.>
Procedure
1. Press DISPLAY.
Selecting the Display Mode
2. Press the Mode soft key. The mode selection menu appears.
3. Press one of the soft keys from T-Y, X-Y, and T-Y&X-Y to set the mode.
Selecting the X Axis Mode (When Mode Is Set to X-Y or T-Y&X-Y)
4. Press the X Axis soft key to select Single or Quad.
If you select Single proceed to step 7; if you select Quad proceed to step 5.
5. Press the Select soft key. The X-Y waveform selection menu appears.
6. Press the soft key corresponding to the desired X-Y waveform from XY1 to XY4.
Setting the X-Axis
7. Press the X Trace soft key. The channel selection menu appears.
8. Use jog shuttle+SELECT to set the channel to assign to the X-axis. If you set X
Axis to Quad, proceed to step 10.
Setting the Y-Axis (When X Axis Is Set to Quad)
9. As with the X axis, press the Y Trace soft key to set the Y axis.
When X Axis is set to Quad
When X Axis is set to Quad
To Next Page
Loading...
