YOKOGAWA SL1400 - Automated Measurement of Waveform Parameters

11-25
IM 701240-01E
Waveform Analysis/Search
3
2
1
4
5
6
7
8
9
10
11
11
12
13
14
15
16
17
18
App
Index
11.5 Automated Measurement of Waveform
Parameters
<For a description of this function, refer to page 2-45.>
Procedure
1. Press MEASURE.
2. Press the Mode soft key , and press the ON soft key.
Selecting the Measurement Parameter
3. Press the Item Setup soft key. The measurement parameter setup dialog box
appears.
• Selecting the Waveform to Be Measured
4. Press the Trace soft key. The trace selection menu appears.
5. Use jog shuttle+SELECT to select waveform to be measured from CH1 to CH6
or Math1 to Math8.
• Selecting the Measurement Parameter
6. Use jog shuttle+SELECT to turn ON/OFF each item on the measurement
parameter dialog box.
You can turn OFF all parameters at once by pressing the All Clear.
You can copy the current parameter settings to all traces by pressing the Copy
to All Trace soft key.
7. Repeat steps 4 to 6 as many times as necessary.