12-4
IM 701240-01E
Setting the Flexible Zone
(Can be set when you select 1 Zone in step 12 on page 12-3)
14. Use jog shuttle+SELECT to select Setup in Flexible Zone.
15. Use jog shuttle+SELECT to set Mode to OFF or ON.
16. Use jog shuttle+SELECT to set Upper/Lower of the waveform to be recorded.
Setting the Graticule
• Setting the Grid
17. Use jog shuttle+SELECT to set the type to
, OFF, or .
• Setting Dark/Light
18. Use jog shuttle+SELECT to set dark/light to light or dark.
• Setting the Width of the Vertical Scale
19. Use jog shuttle+SELECT to set the width to 1div or 10mm.
Proceed to step 19.
Note
The grid setting is linked with the DISPLAY menu > Graticule setting. However, if OFF is
selected, the DISPLAY menu is set to .
Setting Details
Setting the Print Interval of Scale Values
20. Use jog shuttle+SELECT to set the scale to OFF, 200mm, 400mm, or 800mm.
Setting the Print Interval of Channel Labels
21. Use jog shuttle+SELECT to set Ch Label to OFF, 200mm, 400mm, or 800mm.
Setting Whether to Print the Time
23. Use jog shuttle+SELECT to set the time to OFF, 200mm, 400mm, or 800mm.
Setting the Gauge Print
23. Use jog shuttle+SELECT to set the gauge to OFF, ON, or Fine.
12.1 Printing on the Built-in Printer
To Next Page
Loading...
