YOKOGAWA SL1400 - Page 360

12-5
IM 701240-01E
Printing the Screen Image
3
2
1
4
5
6
7
8
9
10
11
12
12
13
14
15
16
17
18
App
Index
Setting the Annotation
24. Use jog shuttle+SELECT to set the print interval of annotations in the right
column of Annotation to OFF, 200mm, 400mm, or 800mm.
25. Use jog shuttle+SELECT to set the type of annotation to be printed in the right
column of Type to Ch Information, Ch Message, or Ch Data.
If Ch Message is selected, proceed to step 26.
If Ch Information or Ch Data is selected, proceed to step 27.
26. Use jog shuttle+SELECT to select Setup. Then, enter the message you wish to
print for the channel using up to 80 characters according to the procedure in
section 4.2.
Setting a Comment
27. Use jog shuttle+SELECT to select Comment. Then, enter the comment text
you wish to print using up to 20 characters according to the procedure in section
4.2.
Previewing the Print Image
28. Press the Preview soft key. The print image is displayed on the screen.
Turn the jog shuttle to change the displayed page.
29. Press the Quit soft key. The original display appears.
Zoom Print A4 PrintFine Print
Executing the Printing
30. Press PRINT. The screen image data is printed on the built-in printer.
To abort printing, press PRINT while printing is in progress.
While printing is in progress,
is indicated at the upper left of the screen.
12.1 Printing on the Built-in Printer