12-12
IM 701240-01E
Setting the Output Format
7. Press the Format soft key. The output format selection menu appears.
8. Select the soft key corresponding to the output format from ESC-P to BJ.
Setting the Color
9. Press the Color soft key to select ON or OFF.
Setting a Comment
10. Press the Comment soft key.
11. Enter the comment string according to the procedure given in section 4.2.
Setting the Print Size (When Format Is ESC-PR)
(ESC-PR is a format for the Seiko Epson printers.)
12. Press the Size soft key to select Normal or Small.
• Normal: A4 size printer
• Small: Postcard size printer
Setting the Print Resolution (When Format Is BJ)
13. Press the Resolution soft key. The print resolution setup menu appears.
14. Press any of the soft keys corresponding to 180 dpi, 300 dpi, 360 dpi, and 600
dpi.
Executing the Print Operation
15. Press PRINT. The screen image data is printed on the USB printer.
To abort printing, press PRINT while printing is in progress.
While printing is in progress,
is indicated at the upper left corner of the
screen.
ESC-PR BJ Other
12.2 Printing on a USB Printer
To Next Page
Loading...
