13-46
IM 701240-01E
Setting the PDF File
25. Press the PDF Setup soft key to display the PDF setup dialog box.
Setting the Paper Size
26. Use jog shuttle+SELECT to set the paper size to Built-in Printer, A3, A4, or A5.
Setting the Orientation (If A3, A4, or A5 was selected in step 25 (Only When
Displaying the T-Y Waveform))
27. Use jog shuttle+SELECT to set the orientation to Landscape or Portrait.
Setting the Number of Divisions per Page (If A3, A4, or A5 was selected in step 26)
28. Use jog shuttle+SELECT to set div/page.
Setting Document Information
29. Use jog shuttle+SELECT to select Title, Author, Sub Title, or KeyWord. Enter
the title, author, sub title of the PDF file using up to 30 characters and the
keyword using up to 90 characters according to the procedure given in section
4.2.
Setting the Color
30. Use jog shuttle+SELECT to turn the color OFF or ON.
Enabling/Disabling Compression
31. Use jog shuttle+SELECT to turn the compression ON or OFF.
Setting Auto Naming
32. Use jog shuttle+SELECT to select the auto naming mode from OFF,
Numbering, and Date.
Setting the PDF File Name
33. Use jog shuttle+SELECT to select File Name. Then, enter the file name using
up to 16 characters according to the procedure in section 4.2.
Selecting the Save Destination of the PDF File
34. Use jog shuttle+SELECT to select File List. Then, select the file save
destination according to steps 14 to 17 in section 13.8.
When Displaying the T-Y Waveform When Displaying the X-Y Waveform
13.14 Creating PDF Files of the Printed Image
To Next Page
Loading...
